|
VABufferID | VAEncMiscParameterFEIFrameControlH264::mb_ctrl |
| MB (16x16) control input buffer. It is valid only when (mb_input | mb_size_ctrl) is set to 1. The data in this buffer correspond to the input source. 16x16 MB is in raster scan order, each MB control data structure is defined by VAEncFEIMBControlH264. Buffer size shall not be less than the number of 16x16 blocks multiplied by sizeof(VAEncFEIMBControlH264). Note: if mb_qp is set, VAEncQPBufferH264 is expected.
|
|
VABufferID | VAEncMiscParameterFEIFrameControlH264::distortion |
| distortion output of MB ENC or ENC_PAK. Each 16x16 block has one distortion data with VAEncFEIDistortionH264 layout Buffer size shall not be less than the number of 16x16 blocks multiplied by sizeof(VAEncFEIDistortionH264).
|
|
VABufferID | VAEncMiscParameterFEIFrameControlH264::mv_data |
| MVs data output of MB ENC. Each 16x16 block has one MVs data with layout VAMotionVector Buffer size shall not be less than the number of 16x16 blocks multiplied by sizeof(VAMotionVector) * 16.
|
|
VABufferID | VAEncMiscParameterFEIFrameControlH264::mb_code_data |
| MBCode data output of MB ENC. Each 16x16 block has one MB Code data with layout VAEncFEIMBCodeH264 Buffer size shall not be less than the number of 16x16 blocks multiplied by sizeof(VAEncFEIMBCodeH264).
|
|
VABufferID | VAEncMiscParameterFEIFrameControlH264::qp |
| QP input buffer with layout VAEncQPBufferH264. It is valid only when mb_qp is set to 1. The data in this buffer correspond to the input source. One QP per 16x16 block in raster scan order, each QP is a signed char (8-bit) value.
|
|
VABufferID | VAEncMiscParameterFEIFrameControlH264::mv_predictor |
| MV predictor. It is valid only when mv_predictor_enable is set to 1. Each 16x16 block has one or more pair of motion vectors and the corresponding reference indexes as defined by VAEncFEIMVPredictorH264. 16x16 block is in raster scan order. Buffer size shall not be less than the number of 16x16 blocks multiplied by sizeof(VAEncFEIMVPredictorH264).
|
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::num_mv_predictors_l0: 16 |
| number of MV predictors. It must not be greater than maximum supported MV predictor.
|
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::search_path: 8 |
| motion search method definition 0: default value, diamond search 1: full search 2: diamond search
|
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::len_sp: 8 |
| maximum number of Search Units, valid range is [1, 63] 0 is treated as 1. reference search locations are grouped in a predefined pattern, and all locations within the same group must be either all are chosen or all are skipped. These predefined groups are called search unit (SU).
|
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::sub_mb_part_mask: 7 |
| defines the bit-mask for disabling sub-partition The lower 4 bits are for the major partitions (sub-macroblock) and the higher 3 bits for minor partitions (with sub-partition for 4x(8x8) sub-macroblocks. xxxxxx1 : 16x16 sub-macroblock disabled xxxxx1x : 2x(16x8) sub-macroblock within 16x16 disabled xxxx1xx : 2x(8x16) sub-macroblock within 16x16 disabled xxx1xxx : 1x(8x8) sub-partition for 4x(8x8) within 16x16 disabled xx1xxxx : 2x(8x4) sub-partition for 4x(8x8) within 16x16 disabled x1xxxxx : 2x(4x8) sub-partition for 4x(8x8) within 16x16 disabled 1xxxxxx : 4x(4x4) sub-partition for 4x(8x8) within 16x16 disabled 1111111 : Invalid 0000000 : default value
|
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::intra_part_mask: 5 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::multi_pred_l0: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::multi_pred_l1: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::sub_pel_mode: 2 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::inter_sad: 2 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::intra_sad: 2 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::distortion_type: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::repartition_check_enable: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::adaptive_search: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::mv_predictor_enable: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::mb_qp: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::mb_input: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::mb_size_ctrl: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::colocated_mb_distortion: 1 |
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::ref_width: 8 |
| motion search window(ref_width * ref_height)
|
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::search_window: 4 |
| predefined motion search windows. If selected, len_sp, window(ref_width * ref_eight) and search_path setting are ignored. 0: not use predefined search window 1: Tiny, len_sp=4, 24x24 window and diamond search 2: Small, len_sp=9, 28x28 window and diamond search 3: Diamond, len_sp=16, 48x40 window and diamond search 4: Large Diamond, len_sp=32, 48x40 window and diamond search 5: Exhaustive, len_sp=48, 48x40 window and full search 6: Extend Diamond, len_sp=16, 64x40 window and diamond search 7: Extend Large Diamond, len_sp=32, 64x40 window and diamond search 8: Extend Exhaustive, len_sp=48, 64x40 window and full search
|
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::max_frame_size |
| max frame size control with multi passes QP setting
|
|
uint32_t | VAEncMiscParameterFEIFrameControlH264::num_passes |
| number of passes, every pass has different QP
|
|
uint8_t * | VAEncMiscParameterFEIFrameControlH264::delta_qp |
| delta QP list for every pass
|
|
uint32_t | VAEncFEIMBControlH264::force_to_intra: 1 |
| when set, correposndent MB is coded as intra
|
|
uint32_t | VAEncFEIMBControlH264::force_to_skip: 1 |
| when set, correposndent MB is coded as skip
|
|
uint32_t | VAEncFEIMBControlH264::force_to_nonskip: 1 |
| specifies whether this macroblock should be coded as a non-skipped macroblock.
|
|
uint32_t | VAEncFEIMBControlH264::target_size_in_word: 8 |
| when mb_size_ctrl is set, size here is used to budget accumulatively. Set to 0xFF if don't care.
|
|
uint32_t | VAEncFEIMBControlH264::max_size_in_word: 8 |
| specifies the max size of each MB
|
|
struct { |
} | VAEncFEIMVPredictorH264::ref_idx [4] |
| Reference index corresponding to the entry of RefPicList0 & RefPicList1 in VAEncSliceParameterBufferH264. Note that RefPicList0 & RefPicList1 needs to be the same for all slices. ref_idx_l0_x : index to RefPicList0; ref_idx_l1_x : index to RefPicList1; x : 0 - MaxNumPredictor.
|
|
VAMotionVector | VAEncFEIMVPredictorH264::mv [4] |
| MV. MaxNumPredictor must be the returned value from attribute VAConfigAttribFEIMVPredictors query. Even application doesn't use the maximum predictors, the VAFEIMVPredictorH264 structure size has to be defined as maximum so each MB can be at a fixed location. Note that 0x8000 must be used for correspondent intra block.
|
|
uint16_t | VAEncFEIDistortionH264::inter_distortion [16] |
| Inter-prediction-distortion associated with motion vector i (co-located with subblock_4x4_i). Its meaning is determined by sub-shape. It must be zero if the corresponding sub-shape is not chosen.
|
|
uint32_t | VAStatsStatisticsParameterH264::len_sp: 8 |
| length of search path
|
|
uint32_t | VAStatsStatisticsParameterH264::search_path: 8 |
| motion search method definition 0: default value, diamond search 1: full search 2: diamond search
|
|
uint32_t | VAStatsStatisticsParameterH264::sub_pel_mode: 2 |
| sub pixel mode definition 00b: integer mode searching 01b: half-pel mode searching 10b: reserved 11b: quarter-pel mode searching
|
|
uint32_t | VAStatsStatisticsParameterH264::inter_sad: 2 |
| distortion measure adjustment for inter search SAD comparison 00b: none 01b: reserved 10b: Haar transform adjusted 11b: reserved
|
|
uint32_t | VAStatsStatisticsParameterH264::intra_sad: 2 |
| distortion measure adjustment for intra search SAD comparison 00b: none 01b: reserved 10b: Haar transform adjusted 11b: reserved
|
|
uint32_t | VAStatsStatisticsParameterH264::mv_predictor_ctrl: 3 |
| indicate if future or/and past MV in mv_predictor buffer is valid. 0: MV predictor disabled 1: MV predictor enabled for past reference 2: MV predictor enabled for future reference 3: MV predictor enabled for both past and future references
|
|
uint32_t | VAStatsStatisticsParameterH264::ft_enable: 1 |
| forward transform enable 0: disable 1: enable, needs frame_qp or mb_qp input for transform
|
|
uint32_t | VAStatsStatisticsParameterH264::intra_part_mask: 5 |
| luma intra mode partition mask xxxx1: luma_intra_16x16 disabled xxx1x: luma_intra_8x8 disabled xx1xx: luma_intra_4x4 disabled xx111: intra prediction is disabled
|
|
uint32_t | VAStatsStatisticsParameterH264::ref_width: 8 |
| motion search window(ref_width * ref_height)
|
|
uint32_t | VAStatsStatisticsParameterH264::search_window: 4 |
| predefined motion search windows. If selected, len_sp, window(ref_width * ref_eight) and search_path setting are ignored. 0: not use predefined search window 1: Tiny, len_sp=4, 24x24 window and diamond search 2: Small, len_sp=9, 28x28 window and diamond search 3: Diamond, len_sp=16, 48x40 window and diamond search 4: Large Diamond, len_sp=32, 48x40 window and diamond search 5: Exhaustive, len_sp=48, 48x40 window and full search 6: Extend Diamond, len_sp=16, 64x40 window and diamond search 7: Extend Large Diamond, len_sp=32, 64x40 window and diamond search 8: Extend Exhaustive, len_sp=48, 64x40 window and full search
|
|
uint32_t | VAStatsStatisticsParameterH264::disable_mv_output: 1 |
| MVOutput. When set to 1, MV output is NOT provided.
|
|
uint32_t | VAStatsStatisticsParameterH264::disable_statistics_output: 1 |
| StatisticsOutput. When set to 1, Statistics output is NOT provided.
|
|
uint32_t | VAStatsStatisticsParameterH264::enable_8x8_statistics: 1 |
| block 8x8 data enabling in statistics output
|
|
uint32_t | VAStatsStatisticsH264::best_inter_distortion0: 16 |
| past reference
|
|
uint32_t | VAStatsStatisticsH264::best_inter_distortion1: 16 |
| future reference
|
|
uint32_t | VAStatsStatisticsH264::mb_is_flat: 1 |
| DWORD 5 flat info.
|
|
uint32_t | VAStatsStatisticsH264::variance_16x16 |
| DWORD 6 variance for block16x16.
|
|
uint32_t | VAStatsStatisticsH264::variance_8x8 [4] |
| DWORD 7 ~ 10, variance for block8x8.
|
|
uint32_t | VAStatsStatisticsH264::pixel_average_16x16 |
| DWORD 11 pixel_average for block16x16.
|
|
uint32_t | VAStatsStatisticsH264::pixel_average_8x8 [4] |
| DWORD 12 ~ 15, pixel_average for block8x8.
|
|